Free rhinestone templates
32 ready-made templates as print-ready PDF and true-size SVG. A to Z plus six shapes, 50.8 mm tall, 3 mm holes for SS10 stones. No account, no email, no checkout.
Each template below is a 50.8 mm tall design with one 3 mm hole per stone on offset rows with a 0.6 mm gap. Print the PDF at 100% and check the 25.4 mm line before cutting, or import the SVG into a cutter at 1:1. Sizes are fixed; for a different width, use the maker.
What these free template files contain
Every file is generated by the same geometry engine the maker uses, not drawn by hand. One vector circle per stone, at real millimetre positions, with the hole diameter set to 3 mm so an SS10 stone drops in without rattling.
| Setting | Value |
|---|---|
| Design height | 50.8 mm (2 inches) for every template. Narrow letters such as I and L keep their height and get side margins instead of being stretched. |
| Hole diameter | 3 mm — the SS10 stone plus a 0.2 mm allowance |
| Gap between holes | 0.6 mm |
| Grid | Offset rows (honeycomb) |
| PDF paper | US Letter, one sheet, with a 25.4 mm calibration line |
| SVG units | Millimetres, one <circle> per stone |
Letters A to Z
- A PDFSVG
- B PDFSVG
- C PDFSVG
- D PDFSVG
- E PDFSVG
- F PDFSVG
- G PDFSVG
- H PDFSVG
- I PDFSVG
- J PDFSVG
- K PDFSVG
- L PDFSVG
- M PDFSVG
- N PDFSVG
- O PDFSVG
- P PDFSVG
- Q PDFSVG
- R PDFSVG
- S PDFSVG
- T PDFSVG
- U PDFSVG
- V PDFSVG
- W PDFSVG
- X PDFSVG
- Y PDFSVG
- Z PDFSVG
Shapes
How to cut a free template
- Download the PDF, or the SVG if you are cutting on a Cricut or Silhouette.
- Print at 100% or Actual size. Never Fit to page.
- Measure the 25.4 mm line with a steel ruler. If it is short, the printer shrank the page.
- Cut the holes in your template material, not in the fabric.
- Test one stone in one hole before cutting the whole sheet.
If a stone does not seat, the hole is wrong for your batch. Stone sizes vary by supplier, and that is the one thing these fixed files cannot adapt to.
Need a different size or a whole word?
These templates are fixed at 50.8 mm tall. The maker takes any width from 25 to 600 mm, any stone from 1 to 8 mm, and any name up to 24 characters, then exports the same two formats.
Type the name, set the stone size, and the count updates as you type. Free to preview.
Questions about the free templates
Are these really free, with no signup?
Yes. No account, no email, no checkout. The files are generated once and served as static downloads.
What stone size do the templates fit?
SS10, with a 3 mm hole. If your stones measure differently, the hole will be slightly loose or tight. The maker lets you set any diameter from 1 to 8 mm.
Can I sell what I make with them?
Yes, for personal or commercial projects. The licence covers the exported files; it does not let you resell the templates as your own product.
Why does an I look small on its sheet?
Every template is 2 inches tall, but a letter like I or L is only about 10 mm wide at that height. The design box is padded sideways so the template stays a usable width, and the letter sits centred with blank margins. Holes only appear where there is ink, so the margins cost nothing.